NEMOX 's new “ESPRESSSO” line of high-end espresso pod system
appliances are for both professional (restaurants, bakeries, caterers, offices,
etc.) and home use, and combines the latest technology with ease of use for
exceptional espresso drink results.
Three models are available:
• ESPRESSSO - pod system for continuous extraction of espresso coffee
• ESPRESSSO CREMALATTE - pod system for continuous extraction of
espresso coffee and Cappuccino frothing system
• ESPRESSSO ELECTRONIC - programmable electronic control panel
featuring pod system and cappuccino system
All models come with two different size pod filters, easily interchangeable by
the user, to compensate different types of pods and ensure proper fit.
From start-up, the machine is ready to make coffee or steam in approximately
two minutes.
The locking mechanism of the infusion chamber is elbow-joint shaped and is
supported by stainless steel brackets and hinges. The mechanical movement
parts use bushes or bushings of tempered and sintered steel.
A self-adjusting mechanism with a micrometric screw permits the infusion
chamber to perfectly adapt in order to compensate for minor thickness
differences between different types of pods.
The lower part of the brewing group is made of techno-polymer material,
reducing heat loss and ensuring that the espresso coffee extraction is always
at the optimum temperature.
This also ensures that the extraction temperature is not too high as to burn the
coffee.
The machine has a large capacity water tank (filtered water usage is
recommended to avoid any problems due to water scale build-up within the
machine components).
To facilitate removal and filling of the water tank, the rear part of the machine
opens using a magnetic and pivoting device.
Water level is visible through a specific opening provided on the body of the
machine.
The body structure is made of steel treated with epoxy paint. The front panel is
made of polished stainless steel enriched by a silk screening in silver color. The
appearance is modern, functional, and professional.
The upper portion of the machine features a cup warmer tray in polished
stainless steel.
ESPRESSSO CREMALATTE and ESPRESSSO ELECTRONIC are
equipped with two independent heat exchangers that allow the user to
dispense espresso coffee and froth milk at the same time.
Considerable energy savings can be realized by alternating use between the
two heat exchangers.
The espresso heat exchanger is made of brass. Water runs through a screwshaped
system, which can be easily removed for maintenance.
The steam heat exchanger is made of aluminum.
ESPRESSSO ELECTRONIC has two separate electronic controls: one for the
espresso function, and the other for the frothing function.
The Steam section (frothing function) includes:
• Steam heater on/off button
• Steam dispensing button
• Steam heater-on display light
• Steam temperature display light
• Automatic frothing system device
• Steam nozzle
The Coffee section (espresso function) includes:
• Coffee heater on/off button
• Coffee heater-on and program functions display light
• Soft-touch button for strong espresso
• Soft-touch button for light espresso
• Soft-touch button for continuous coffee delivery
• Coffee temperature display light
The programmable functions are:
• Pre-infusion
• Two programmable coffee dispensing buttons for desired amounts of
coffee

Downoload the brochure: (pdf 1.25 Mb)